Replacing The Front-Bezel Heat-Sensor; Procedure; Post-Requisites - Alienware Area-51 R2 Service Manual

Replacing the Front-bezel
Heat-sensor
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After Working Inside Your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

1
Reroute the chassis heat-sensor in the bracket.
2 Align the chassis heat-sensor in the securing clip.
3
Close and press the release tab on the securing clip.

Post-requisites

1 Replace the PCI
2
Replace both the left and right side-panels. See
Panels".
3
Replace the stability
88
Before Working Inside Your
fan.
foot.
Computer. For more safety best
"Replacing the Side
Computer.