Removing The Power-Supply Unit; Prerequisites; Procedure - Alienware Area-51 R2 Service Manual

Removing the Power-Supply
Unit
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After Working Inside Your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Prerequisites

1
Remove the
2 Remove both the left and right side-panels. See
Panels".
3 Remove multiple graphics
4
Remove the

Procedure

NOTE: Note the routing of all cables as you remove them so that you can
reroute them correctly after you replace the power supply.
1 Lay the computer on the left side.
2
Press the tab on the power cables and disconnect all the cables from the
power supply.
Before Working Inside Your
stability foot.
cards.
full length graphics
Computer. For more safety best
"Removing the Side
cards.
Computer.
101