Pro-Form StrideClimber 490 User Manual page 8

5. The Console (4) can use four D batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. If you do not do this, you may
damage the console displays or other elec-
tronic components. Press the two tabs on the
battery cover and remove it. Next, orient four
batteries as shown by the markings inside the
battery compartment, and insert the batteries
into the Console. Then, reattach the battery
cover.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the front
cover of this manual. To avoid damaging the
console, use only a manufacturer-supplied
AC adapter. Plug one end of the AC adapter
into the jack on the console; plug the other end
into an outlet installed in accordance with all
local codes and ordinances.
6. While another person holds the Console (4)
near the Upright (3), connect the console wire to
the Wire Harness (73). Insert the excess wire
downward into the Upright.
Tip: Avoid pinching the wires during this
step. Attach the Console (4) to the Upright (3)
with four M4 x 19mm Screws (75).
5
Cover
4
6
4
3
Avoid pinching the
Wire Harness (73)
during this step
8
Tabs
Batteries
Console
Wire
73
75