Pro-Form StrideClimber 490 User Manual page 7

3. Have another person hold the Upright (3) in the
position shown. Insert the Wire Harness (73)
upward through the Upright. Tip: Use an elas-
tic band or tape to prevent the Wire Harness
from falling into the Upright.
Tip: Avoid pinching the Wire Harness (73)
during this step. Insert the Upright (3) into the
Frame (1). Attach the Upright with two M8 x
16mm Button Screws (53) and two M8 x 35mm
Button Screws (80). Do not tighten the Button
Screws yet.
4. Identify the Right Upper Body Arm (36), which is
marked with an "R" sticker.
Slide the Right Upper Body Arm (36) onto the
Right Upper Body Leg (37). Attach the Right
Upper Body Arm with two M8 x 30mm Button
Screws (67).
Attach the Left Upper Body Arm (22) in the
same way.
3
3
73
80
53
1
4
22
7
Avoid pinching the
Wire Harness (73)
during this step
53
80
36
67
37