Side Wall Channel; Side Wall Angle - Arrow Storage Products 697.68222 Owner's Manual & Assembly Instructions

• 5986 Rear Wail Angle (2)
k._l,p_+e- Z.,_It ® Parts Needed For ® + 103+9 RearWallChannel ( 2)
Frame Assemblies
® 10390 Side Wall Channel (4)
Q 10394 Side Wall Angle (4)
SR15
The main frame pieces reinforce the
walls. These pieces will later be in-
stalled in the center and at the top
edge of the side walls and the rear
wall. Proceed as follows:
1 Overlap the rear wall channel
pieces as shown in the figure and
fasten the two pieces together with
eight bolts as shown.
2 Make two side wall channels by
overlapping the side wall channel
pieces as shown. Fasten each set
together with eight bolts as shown.
•, I ILl RearWall Channel
10389 L
118 1/8" 300,0cm
&
10390
I
&
10389
ill
10390
IJ
3 Overlap the rear wall angle
pieces as shown in the figure and
fasten them together with one bolt in
the center hole.
4 Make two side wall angles by
overlapping the side wall angle
pieces as shown. Fasten each set
together with one bolt thru the sec-
ond large hole from the end of each
part.
,5 Set the assemblies aside. You will
use them later.
5986
RearWall Angle
118 1/8" 300,0cm
-- 10394 ,- - 14S0d3/8 'wall 3A56g,16eSm
Rear Wall Channel 118 1/8" 300,0cm
Side Wall Channels 140 3/8" 356,6cm (2 Assemblies)
Rear Wall Angle 118 1/8" 300,0cm
15