Arrow Storage Products 697.68222 Owner's Manual & Assembly Instructions page 25

• Left Gable Assemblies (2)
® Parts Needed For ® O RightGable Assemblies ( 2)
Step 12 Gab|es/RoofBeams
®S,og,e . oof Be.m A..emb.e.(=)
• 6636 Gable Brace (2)
WP25
1 Lift and fasten a right and left
gable, under angle at corner, to the
door track and rear wall angle with
so rews.
Hint: On the front gable, leave out 2
screws closest to center gable leg.
On the rear gable, use a bolt and nut
at the overlapping rear wall angle.
2 Fasten the single roof beam to
the outer gable leg as shown using
bolts.
Hint: The holes along the length of
the beam must be on the top surface.
Repeat Step 1 forthe opposite side of
building.
3
Join the left and right gables
together with a gable brace using a
bolt in the second hole from the
bottom only. Do this step for both
front and rear gables.
Repeat Step 2 for the opposite side of
building.
@
Nut and bolt
at rear of building.
6636 Gable Brace
Gable
10397 Roof Beam (Single)
25