Ridgecap - Arrow Storage Products 697.68222 Owner's Manual & Assembly Instructions

Arrow storage products outdoor storage - lawn storage building user manual
Hide thumbs Also See for 697.68222:
Table of Contents

Advertisement

@ 6538
Roof Panel (2)
St p 17
.
PartsNeeded For ®
@,8,9
RidgeCap(3)
@ 10510 Right Roof Panel (1)
e
Ridge Caps & Panels
®10511
Left Roof Panel (l )
WP30
1 Install the third ridge
caps 6869
overlapping
the second
ridge caps
while installing the remaining
roof
panels 6538. Hint: The bolts on the
ridge cap need to be left loose to
move the ridge cap to the side and
overlap the ribs of the next roof paneL
Cover the notched areas of the roof
panels
with strips of weather
strip-
ping tape and continue weather strip-
ping the ridge.
2
Install the left 10511 and right
roof panel
10510 as you unroll the
weather stripping
tape, and press it
down. Fasten the lower end of the
panels to the side wall angles
using
screws and washers.
Reducing
Large Gable Bulge
Loosen eight bolts and nuts shown. Apply
pressure with one hand at the peak of the
gable and tighten bolt #1. Keeping pressure
on the gable work down the slope tightening
each bolt. Excess material will overlap small-
er gable at seam. Once materiN bulge is
worked out tighten four verticN bolts that
connect the large and small gables,
#2
3 Fasten the roof panel ribs, peak
caps and ridge caps together
using
bolts and nuts.
6869
6538
6869
PeakCap
Cut
Weather Stripping
and Fold Under
30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents