Adjusting The Picture; Operation Without Remote Control - Loewe Xelos A 42 HD+ 100 Operating Instructions Manual

Daily operation

Adjusting the picture

Call TV menu.
TV menu
Picture
Picture adjustment
Select Picture,
go to the menu line below.
TV menu
Picture (standard values, TV digital)
Picture adjustment
Standard values (TV digital)
Select the desired picture function,
go to the menu line below.
Make changes.
Explanations of the picture settings:
Picture Switches the picture parameters between standard and
adjustment personal values.
Contrast Adjust contrast.
Colour intensity Adjust the colour.
Colour Set warmer or colder tone for picture.
temperature
Brightness Adjust the brightness of the picture.
Sharpness Adjust the contour sharpness of the picture.
DNC Removes or reduces the signal noise in the picture.
more ...
Call with OK.
Image +
Picture improvement on/off and demo mode for Image + .
Picture format Set picture format (see page 22).
Move picture Move picture vertically (see page 22).
up/down
Auto format Automatic detection and setting of the picture format for
Cinemascope or widescreen movies.
DMM Reduce jolting.
Automatic The TV picture adapts to the ambient brightness. The
dimmer
power consumption of the TV set is also reduced.
Standard values / personal values for picture adjustment
Call TV menu.
Select Picture,
go to the menu line below.
Select Picture adjustment,
go to the menu line below.
33156_024_Xelos_A32_42_GB_9_00_B21 21 33156_024_Xelos_A32_42_GB_9_00_B21 21
INFO END
Sound Recording Connections Settings
...
INFO END
Contrast Colour intensity C
...
TV menu
Picture (personal values, TV digital)
Picture adjustment
Standard values (TV digital)
Select desired values for picture,
OK call selected values for picture.
Explanations for Picture adjustment:
Custom adjustments of contrast, colour intensity, colour temperature,
brightness, sharpness and digital noise supression are saved in the custom
values. Every signal source (TV analogue, TV digital, HD analogue, HD
digital, PC, PhotoViewer) has its own personal values.
By selecting Standard values the picture parameters are reset to factory
values for the respective currently active signal source.
See the glossary for an explanation of the signal sources: Signal input
groups.
In the index of the TV set, all the picture and sound adjustments can be
reset to the factory values for all signal sources in one step under Reset
picture/sound or Factory settings picture/sound.

Operation without remote control

Changing the station on the TV set
+ / – Station up/down.
Switching radio on or off or switching to radio
R Radio on or switch between TV and Radio.
Calling the TV menu on the set
M call Direct control on TV set menu,
Direct control on TV set
election Volume
19
– / + Select function.
➠ Service is intended for the customer service.
M or R Go to the menu line below,
– / + make changes.
M Move up one menu line,
– / + select other function.
INFO END
Personal values (TV digital)
OK
Brightness Contrast Picture format Stat
21 -
03.07.2008 15:37:19 03.07.2008 15:37:19