Positioning/Aligning The Dvb-T Antenna - Loewe Xelos A 42 HD+ 100 Operating Instructions Manual

Initial installation
Digital Link If you have logged in and connected a recorder in the
Plus connection wizard, the Digital Link Plus transmission
starts when the sound component wizard closes. If a
Digital Link Plus compatible recorder is connected, the
station list of the analogue stations is transmitted to the
external recorder.
You can also call Digital Link Plus manually under TV menu
→ Connections → Digital Link Plus.
Explanations of the DVB-T antenna:
Room With good reception conditions a room antenna can be
antenna used for DVB-T (socket ANT2).
Active Under less favourable reception conditions, an active
antenna
antenna is recommended which must be set accordingly
in the first time commissioning or in the TV menu → Con-
nections → Antenna DVB → Antenna DVB-T (see DVB-T
antenna on page 13).
Unidirectional If the location is outside of the normal transmission range
antenna then a directional antenna can be used to improve recep-
tion quality.
- 14
33156_024_Xelos_A32_42_GB_9_00_B14 14 33156_024_Xelos_A32_42_GB_9_00_B14 14

Positioning/aligning the DVB-T antenna

If you receive one or more DVB-T stations with picture or sound interfer-
ence, you should change the position and alignment of the antenna. Ask
your dealer to tell you which channels are used to broadcast the DVB-T
stations in your region.
➠ In normal TV mode, without other displays.
A DVB-T station is received and selected.
Call TV menu.
Select Settings,
go to the menu line below.
Select Stations,
go to the menu line below.
Select Manual adjustment,
OK call manual adjustment.
Signal source
Select the area in which you want the broadcaster to search here. You can
use the button to automatically select station by station.
Manual adjustment
SIgnal source
Channel
Frequency
Bandwidth
Name
C/N
Level
BER
The signal source is already on DVB-T due to the station
preselection.
Position and align the antenna in such a manner that
maximum values for C/N and Level are obtained.
Blue button: Start search.
Search for DVB-T stations one after another and compare
values for C/N and Level.
Then position/align the antenna to the weakest station
so that maximum values for C/N and Level are obtained.
Thereafter perform an automatic search for all DVB-T
stations, see page 24.
Explanation of the setting possibilities:
Depending on the selected channel and country the
Bandwidth
associated bandwidth of 7 or 8 MHz will be set auto-
matically.
DVB-T DVB-C DVB-S
E05
177.50 MHz
7 MHz
12 Test
81
80
0 E-7
END
Overwrite station
Search
INFO
03.07.2008 15:36:50 03.07.2008 15:36:50
A