Loewe Xelos A 42 HD+ 100 Operating Instructions Manual page 37

DVB
If you have adapted the update settings:
OK proceed.
Select Start update,
OK start update procedure.
Software update wizard
Current TV base software:
Current DVB software:
You can now search for new software. Please select the software type and
start the search with the
Software update
Software type
TV base software
DVB software
Proceed
OK
Select software type:
TV base software or
DVB software,
OK start search.
If a new software version is available after the search, the
following screen message appears.
Loading new software
Software update wizard
A new software is available.
TV base software:
Please specify whether and, if so, when you want to load the new software.
Software update
Update options
Load new software now
Load new software after switch off to standby
Keep current software
Proceed
OK
Select update option:
Load new software now
Load new software after switch off to standby
(update after switching off)
Keep current software (no update desired).
OK Proceed or exit wizard.
OK Start Software update.
33156_024_Xelos_A32_42_GB_9_03_M37 37 33156_024_Xelos_A32_42_GB_9_03_M37 37
V4.3.0
V4.3.0
button.
OK
END
OK
current V4.3.0 new V4.4.0
OK
END
A bar informs you about the progress of the charging
process. Do not switch your set off during this time!
This process can take up to 20 minutes depending on the
selected update source. You will be informed at the end.
At the end of charging:
Switch the TV set off and back on with the mains switch.
This is unnecessary when loading the software with the
Load new software after switch´off to standby update
option.
If a new software has not been updated by a DVB stati-
on, you will be reminded of this several times when
switching on the set.
➠ If a new TV software and a new DVB software are
available in the automatic search for new software via
DVB stations (see page 36), you can choose which
software is to be updated.
37 -
04.07.2008 08:46:54 04.07.2008 08:46:54