DFI-ITOX G4V300-D User Manual page 74

3
Award BIOS Setup Utility
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the HDD
Power Down field is activated.
Min Saving
Max Saving
User Define
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This selection will cause the system to turn
Blank Screen
DPMS
This field is used to activate the video off feature when the system
enters the Suspend mode.
When the system enters the Suspend mode, the CPU and onboard
peripherals will be shut off.
This is selectable only when the Power Management field is set to
User Define. When the system enters the HDD Power Down mode
according to the power saving time selected, the hard disk drive will
be powered down while all other devices remain active.
74
Minimum power saving time for the HDD Power
Down = 15 min.
Maximum power saving time for the HDD Power
Down = 1 min.
Allows you to set the power saving time in the
“HDD Power Down” field.
off the vertical and horizontal synchronization
ports and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Initializes display power management signaling. Use
this option if your video board supports it.