DFI-ITOX G4V300-D User Manual page 100

4
Supported Software
4.2.7 Winbond Hardware Doctor Utility
The Winbond Hardware Doctor Utility is capable of monitoring the
system’s hardware conditions such as the temperature of the CPU
and system, voltage, and speed of the cooling fans. It also allows you
to manually set a range to the items being monitored. If the values
are over or under the set range, a warning message will pop-up. The
utility can also be configured so that a beeping alarm will sound
whenever an error occurs. We recommend that you use the “Default
Setting” which is the ideal setting that would keep the system in
good working condition.
To install the utility, please follow the steps below.
1. Click “Winbond Hardware Doctor Utility”. The screen below will
appear.
2. Follow the prompts on the screen to complete installation.
3. Restart the system.
100
Note:
Use this utility only in Windows
Windows 2000, Windows NT
®
system.
98SE, Windows
®
4.0 or Windows
® ®
ME,
®
XP operating