DFI-ITOX G4V300-D User Manual page 20

2
Hardware Installation
2.4 Jumper Settings for Selecting the CPU’s Front
Side Bus
CPU Front Side Bus Select - Jumper JP2
This jumper is used to select the front side bus of the CPU installed
on the system board.
20
3
2
1
2-3 On: 100MHz
1-2 On: Auto
(default)
Important:
Overclocking may result in the processor’s or system’s instability
and is not guaranteed to provide better system performance.
3
2
1
All Off: 133MHz
3
2
1