DFI-ITOX G4V300-D User Manual page 71

Allows parallel port to operate in bipolar mode.
If you selected EPP, the “EPP Mode Select” field is configurable. If you
selected ECP, the “ECP Mode Use DMA” field is configurable. If you
selected ECP+EPP, both “EPP Mode Select” and “ECP Mode Use
DMA” are configurable.
This is used to select the EPP mode.
This is used to select the DMA channel of the parallel port.
Keep Off When power returns after an AC power failure, the
system’s power is off. You must press the Power
button to power-on the system.
Turn On When power returns after an AC power failure, the
system will automatically power-on.
Last State When power returns after an AC power failure, the
system will return to the state where you left off
before power failure occurs. If the system’s power is
off when AC power failure occurs, it will remain off
when power returns. If the system’s power is on
when AC power failure occurs, the system will
power-on when power returns.
This field is used to select the game por t’s address.
This field is used to select the midi por t’s address. If you have
selected the midi port’s address, you may select its IRQ in the “Midi
Port IRQ” field.
This field is used to select the midi port’s IRQ.
Award BIOS Setup Utility
3
71