DFI-ITOX G4V300-D User Manual page 19

3. Now power-on the system.
If your reason for clearing the CMOS data is due to incorrect
setting of the processor’s ratio/clock in the BIOS, please proceed
to step 4.
4. After powering-on the system, press <Del> to enter the main
menu of the BIOS.
5. Select the CPU Frequency Control submenu and press <Enter>.
6. Set the “CPU Clock Ratio” or “CPU Host/3V66/PCI Clock” field
to its default setting or an appropriate frequency ratio or bus
clock. Refer to the CPU Frequency Control section in chapter 3
for more information.
7. Press <Esc> to return to the main menu of the BIOS setup
utility. Select “Save & Exit Setup” and press <Enter>.
8. Type <Y> and press <Enter>.
Hardware Installation
2
19