DFI-ITOX G4V300-D User Manual page 69

Any Key Press any key to power-on the system.
Keyboard 98 When this option is selected, press the “wake up”
key of the Windows
power-on the system.
Move the cursor to this field and press <Enter>. Enter your
password. You can enter up to 5 characters. Type in exactly the same
password to confirm, then press <Enter>.
The power button will not function once a keyboard password has
been set in this field. You must type the correct password to power-
on the system. If you forgot the password, power-off the system and
remove the battery. Wait for a few seconds and install it back
before powering-on the system.
This field is used to select a function key that you would like to use
to power-on the system.
Enabled Enables the onboard floppy disk controller.
Disabled Disables the onboard floppy disk controller.
Auto The system will automatically select an I/O address
for the onboard serial por t 1 and serial por t 2.
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3
manually select an I/O address for the onboard
serial port 1 and serial port 2.
Disabled Disables the onboard serial port 1 and/or serial
port 2.
The system board supports IrDA function for wireless connectivity
between your computer and peripheral devices. You may not use
IrDA and the COM 2 serial port at the same time. If you are using
the COM 2 serial port, make sure this field is set to Normal.
Award BIOS Setup Utility
98 compatible keyboard to

Allows
3
you to
69