Samsung SND-L6013 User Manual page 40

installation & connection
connecting waterproof audio cable
1. Remove the dome cover and the case.
2. Pull out the rubber plug on the bottom as shown in
the figure.
3. Insert the waterproof audio cable into the hole that
was made by removing the rubber plug in step 2
above, and connect it to the connector.
4. Insert the rubber stopper of the waterproof audio
cable into a hole.
5. Adjust the lens in a desired direction by referring to
the "adjusting the monitoring direction for the
camera" section. (page 44)
6. Attach the dome cover.
40_ installation & connection