Product Parts - Samsung SND-L6013 User Manual

overview
Item
Internal Cover
a
Illumination Sensor
b
IR LED
c
Lens
d
Reset Button
e
Micro SD Memory
f
Card Compartment
PoE Connector
g
20_ overview
It is a cover to protect the main body.
Detects incoming light to control the IR LED.
These infrared LED's are controlled by the illumination sensor.
Lens for the camera.
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
If you reset the camera, the network settings will be adjusted so that
J
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
Compartment for the Micro SD memory card.
Connects to the network and supplies power through Ethernet cable.
Description