Table of Contents
Advertisement
Item
Internal Cover
a
Illumination Sensor
b
IR LED
c
Lens
d
Zoom control lever
e
Focus control lever
f
PoE Connector
g
Micro SD Memory
h
Card Compartment
Reset Button
i
It is a cover to protect the main body.
Detects incoming light to control the IR LED.
These infrared LED's are controlled by the illumination sensor.
Lens for the camera.
T
Zoom in (Tele)
W
Zoom out (Wide)
By rotating it to the right or the left, the lens zoom can be adjusted. By
rotating it clockwise, the zoom can be fixed.
N
Focusing on a near object (Near)
F
Focusing on a far object (Far)
By rotating it to the right or the left, the focus can be controlled. By rotating it
clockwise, the focus can be fixed.
Connects to the network and supplies power through Ethernet cable.
Compartment for the Micro SD memory card.
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
If you reset the camera, the network settings will be adjusted so that
J
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
Description
English _23
Hide quick links:
Advertisement
Table of Contents
