Samsung SND-L6013 User Manual page 35

How to connect the rJ45 waterproof cable to a Lan cable
1. Insert it through the arrow direction.
2. Connect the LAN connector (male) to the
cable.
3. Connect the RJ45 modular jack (female) to
the RJ45 connector (male).
Please, keep each of the parts separated.
`
J
4. Assemble by rotating the RJ45 modular
jack (female) and the RJ45 protection cover
clockwise (Follow the arrow).
5. Assemble by rotating RJ45 protection cover
and back cover clockwise (Follow the arrow).
When the back cover is assembled, the cable
waterproof gasket is tightly attached to the
cable to make it waterproof.
You must fully assemble it to rotate the back cover up to the end of the screw thread of the RJ45
`
J
connector.
RJ45 connector
(male)
RJ45 modular
jack (female)
RJ45 connector
protection cover
Cable waterproof
gasket
Back cover
English _35