Samsung SND-L6013 User Manual page 109

auto ip configure
You can set the IP available for access and camera searching automatically.
1. From the Setup menu, select the
<network ( )> tab.
2. Click <auto ip configure>.
3. Set the <Link-Local ipv4 address>.
An additional IP address may be
assigned to assess the camera from
the Link-Local network.
• Auto configure : It specifies Able
or Disable for the Link-Local IPv4
address.
• IP address : Display the assigned IP
address.
• Subnet mask : Display the subnet mask of the assigned IP.
4. Set the <upnp discovery>.
Cameras can be automatically searched in the client and operating system in
support of the UPnP protocol.
• UPnP discovery : It specifies Able or Disable for UPnP Discovery.
• Friendly name : Display the camera name.
Friendly name is displayed in the format of SAMSUNG-<Model Name>-<MAC
Address>.
In the Windows operating system which basically supports UPnP, the cameras connected to the
`
M
network are displayed.
5. Set the <Bonjour>.
Cameras can be automatically searched in the client and operating system in
support of the Bonjour protocol.
• Bonjour : It specifies Able or Disable for Bonjour.
• Friendly name : Display the camera name.
Friendly name is displayed in the format of SAMSUNG-<Model Name>-<MAC
Address>.
In the Mac operating system, which support Bonjour by default, the connected cameras are
M `
automatically displayed in the Bonjour bookmark of the Safari web browser.
If the Bonjour bookmark is not displayed, check Bookmarks Setup in the "Preference" menu.
6. When done, click [apply ( )].
English _109