Samsung SND-L6013 User Manual page 112

setup screen
Storage
You can activate recording on your device, set the recording conditions, check the saved
data capacity and format the device itself.
1. From the Setup menu, select the
<event (
2. Click <Storage>.
3. Select a device to save data in.
If your device is properly recording data, it
M `
will display "Recording".
If you see an "Error" message, check the
`
following:
-
Check the storage to see if it is
connected to the device.
-
Check the files in the storage to see if
they are damaged.
-
Check the storage to see if they are
physically damaged.
If the "Error" message does not disappear after following the instructions, format the Micro SD
`
card.
After formatting, if the error message still remains, replace the Micro SD card.
If you remove the Micro SD card without changing a button to 'off' position in settings or if you
`
connect a camera to an unstable power source, the Micro SD card may be damaged.
After operation in record mode, you are limited to 2 simultaneously accessible profiles, and to 3
`
J
connected users. However, existing users will be sustained.
112_ setup screen
)> tab.