High load retaining net (SW)
This allows the use of the entire loading volume up to the roof:
-
behind the front seats (row 1) when the rear seats are folded.
-
behind the rear seats (row 2).
396
Row 1
Fold the rear seats.
Remove the cover trims in the roof on each
side.
Position the net's upper hooks in the roof,
on each side in turn.
Attach the bottom of the net to the fixings
located at the seat belt mountings.
Pull on the straps to stretch the net.
Once fitted, the net does not prevent folding of
the rear seat backrests.
Row 2
Remove the cover trims in the roof on each
side.
Position the net's upper hooks in the roof,
on each side in turn .
Attach the bottom of the net to the rings
located either side of the boot carpet or on
the boot rails (depending on trim level).
Pull on the straps to stretch the net.