Tighten the security bolt using the
wheelbrace 1 fitted with the security
socket 4 (according to equipment).
Tighten the other bolts using the
wheelbrace 1 only.
Refit the bolt covers on each of the bolts
(according to equipment).
Store the tools in the box.
After changing a wheel
To store the punctured wheel in the boot
correctly, first remove the central cover.
When using the "space-saver" type
spare wheel, do not exceed 50 mph
(80 km/h).
Have the tightening of the bolts and the
pressure of the spare wheel checked
by a PEUGEOT dealer or a qualified
workshop without delay.
Have the punctured wheel repaired
and refitted to the vehicle as soon as
possible.
If your vehicle has tyre under-inflation
detection, check the tyre pressures then
refer to the corresponding section.
Practical information
The tyre inflation pressures are given on this
label.
7
233