Peugeot Connect Usb - PEUGEOT 308 Handbook

05

PEUGEOT CONNECT USB

Using the PEUGEOT CONNECT USB
This unit consists of a USB
port and an auxiliary Jack
socket * . The audio fi les are
transmitted from a portable
device - digital player or a
USB memory stick - to your
PEUGEOT Connect Sound
(RD5) and heard via the
vehicle's speakers.
USB memory stick (1.1, 1.2 and 2.0) or Apple
generation 5 or later:
- USB memory sticks should be formatted FAT or FAT 32
(NTFS not supported),
- the Apple player lead is essential, player lead is essential,
® ® ®
- navigation through the fi le database is also possible by
means of the steering mounted controls.
Other Apple players of earlier generations and players using the players of earlier generations and players using the
® ® ®
MTP protocol * :
- play via Jack-Jack lead only (not supplied),
- navigation through the fi le database is from the portable
device.
374
player of player of
® ® ®
* According to vehicle.
Connecting a USB memory stick
Connect the memory stick to the port, directly or
using a lead. If the audio equipment is switched
on, the USB source is detected as soon as it
is connected. Play begins automatically after a
delay which depends on the capacity of the USB
memory stick.
The fi le formats supported are .mp3 (mpeg1
layer 3 only) and .wma (standard 9 only,
128 kbits/sec compression).
Certain playlist formats are supported (.m3u, ...) .
On reconnection of the previous memory stick
used, play is resumed automatically with the last
track played.
The system puts together playlists (temporary memory) created
over a period which depends on the capacity of the USB device.
The other sources are available during this time.
The playlists are updated each time the ignition is switched off or
each time a USB memory stick is connected.
When connecting for the fi rst time, the classifi cation suggested
is by folder. When you reconnect, the classifi cation selected
previously is retained.