Removing A Wheel - PEUGEOT 308 Handbook

Practical information

Removing a wheel

Parking the vehicle
Immobilise the vehicle where it does not
block traffic: the ground must be level,
stable and not slippery.
Apply the parking brake unless it has
been programmed to automatic mode,
switch off the ignition and engage first
gear to block the wheels.
Check that the braking warning lamp
and the P warning lamp in the parking
brake control lever come on.
The occupants must get out of the
vehicle and wait where they are safe.
Never go underneath a vehicle raised
using a jack; use an axle stand.
230
List of operations
 Remove the bolt cover from each of
the bolts using the tool 3 (according to
equipment).
 Fit the security socket 4 on the
wheelbrace 1 to slacken the security bolt
(if fitted).
 Slacken the other bolts using the
wheelbrace 1 only.