PEUGEOT 308 Handbook page 136

Driving
Switching on / Pause
 Turn wheel 1 to the "LIMIT" position: the
speed limiter mode is selected but is not
switched on (Pause).
 Switch the speed limiter back on by
pressing button 4 , if the speed displayed
is suitable (by default, the last speed
programmed).
 You can temporarily stop the the speed
limiter by pressing button 4 again: the
display confirms that it has been stopped
(Pause).
134
Adjusting the speed limit
setting
You do not have to switch the speed limiter on
in order to set the speed.
Once the function is selected, you can modify
the speed setting by:
using buttons 2 and 3 , increasing or
-
decreasing the speed displayed:
 by successive short presses, to modify
by + or - ½ mph (1 km/h),
 by a maintained press, to modify in steps
of + or - 3 mph (5 km/h).
- a press on button 5 :
 the six speeds memorised, displayed in
the touch screen,
 choosing a speed: it is displayed in the
instrument panel.
The selection screen closes after a few
moments.