PEUGEOT 308 Handbook page 30

Monitoring
Service overdue
For 5 seconds after the ignition is switched on,
the spanner flashes to indicate that the service
must be carried out as soon as possible.
Example: the service is overdue by 186 miles
(300 km).
For 5 seconds after the ignition is switched on,
the screen indicates:
5 seconds after the ignition is switched on,
the distance recorder resumes its normal
operation. The spanner remains on .
With Blue HDi Diesel versions the Service
warning lamp may come on as soon as the
ignition is switched on.
The spanner may also come on if
you have exceeded the period since
the last service, as indicated in the
maintenance and warranty guide.
With Blue HDi Diesel versions, the
spanner can also come on in advance
of the service interval, according to the
level of deterioration of the engine oil,
which depends on the driving conditions
in which the vehicle is used.
28
Service indicator zero reset
After each service, the service indicator must
be reset to zero.
If you have carried out the service on your
vehicle yourself:
 switch off the ignition,
 press and hold the trip distance recorder
zero reset button,
 switch on the ignition; the distance recorder
display begins a countdown,
 when the display indicates "=0" , release
the button; the spanner disappears.
Following this operation, if you wish to
disconnect the battery, lock the vehicle
and wait at least five minutes for the
zero reset to be registered.
Retrieving the service
information
You can access the service information at any
time.
 Press the trip distance recorder zero reset
button.
The service information is displayed for a
few seconds, then disappears.