Cradlepoint IBR600 Product Manual page 134

IBR600 | USER MANUAL Firmware ver. 4.0.2
CRADLEPOINT
7.4.7 Global VPN Settings
These settings apply to all configured VPN tunnels.
Enable Certificate Support: Selecting this will allow you to load a certificate for VPN to the router. Disabling certificate
support will no longer use any previously loaded certificate but will not delete it from the router. Only one certificate at a
time is supported.
IKE / ISAKMP Port: Internet Key Exchange / Internet Security Association and Key Management Protocol port. Default:
500. This is a standard VPN port that usually does not need to be changed.
IKE / ISAKMP NAT-T Port: Internet Key Exchange / Internet Security Association and Key Management Protocol network
address translation traversal port. Default: 4500. This is a standard VPN NAT-T port that usually does not need to be
changed.
NAT-T KeepAlive Interval: Default: 20 seconds. Range: 0-3600 seconds. 20 seconds will be sufficient in almost all
cases.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 132