Zooming; Operating Multiple Cameras With The Remote Commander; Adjusting The Camera; Focusing On A Subject - Sony BRC-Z330 Operating Instructions Manual

Zooming

Press either of the ZOOM buttons.
Subject appears
farther away.
(Wide angle)
DIRECTION SET
Zooms in or out
slowly
(SLOW side)
Note
When you perform pan/tilt operation while the camera is
in the telephoto mode, the moving speed of the image on
the screen may be a little jerky.
Operating Multiple Cameras with
the Remote Commander
1
Set the IR SELECT switch on the rear of the camera
you want to operate to 1, 2 or 3.
2
Press the CAMERA SELECT button on the
Remote Commander that corresponds to the
number set in step 1.
AUTO
DATA SCREEN
Then, you can operate the camera(s) specified by
number. Every time you operate the camera(s) using the
Remote Commander, the CAMERA SELECT button
pressed in step 2 lights.
44

Adjusting the Camera

PAN-TILT
RESET
Subject appears
SLOW ZOOM FAST
closer.
T T
(Telephoto)
W W
L/R
RM-EV100
Zooms in or
out fast
(FAST side)
IR SELECT
1
2
3
POWER
CAMERA SELECT
CAMERA
1 2 3
SELECT
FOCUS
MANUAL
FAR NEAR
BACK LIGHT
Adjusting the Camera
NEAR
AUTO
FAR

Focusing on a Subject

To focus the camera on a subject
automatically
Press the AUTO button.
The camera focuses on the subject at the center of the
screen automatically.
To focus the camera on a subject
manually
After pressing the MANUAL button, press either the
FAR or the NEAR button to have the camera focus on
the subject.
Focusing on a far subject
Focusing on a near subject
MANUAL
BACK LIGHT
CAMERA SELECT
1 2 3
FOCUS
AUTO MANUAL
FAR NEAR
DATA SCREEN BACK LIGHT