Brbk-Sa1 Analog Sd Output Card (Not Supplied) - Sony BRC-Z330 Operating Instructions Manual

switch. For details, see "Images when menu display
is ON" on page 28.
C Panel switch
Switch between SD-SDI signals and HD-SDI
signals.
When outputting HD-SDI signals, you can select
whether to overlap the menu display with the image
output from SDI connectors 1 and 2. For details, see
"Images when menu display is ON" on page 28.
Notes
• SD-SDI and HD-SDI signals cannot be supplied
simultaneously.
• Set the panel switch before turning on the
camera.
• Do not push the switch forcibly with a
screwdriver, etc.
Images when menu display is ON
When a BRBK-HSD2 is installed in the
BRC-Z330 card slot
BRBK-HSD2 MONITOR
panel switch connector
Left positionHD/
DATA MIX: ON
(HD-SDI output)
Middle positionHD/
DATA MIX: OFF
(HD-SDI output)
Right positionSD
(SD-SDI output)
a: Menu is displayed on image
×: Menu is not displayed on image
Memo
The DATA MIX switch on the BRC-Z330 HD Color
Video Camera is disabled.
When a BRBK-HSD2 is installed in the
BRU-SF10 card slot
BRBK-HSD2 MONITOR
panel switch connector
Left positionHD/
DATA MIX: ON
(HD-SDI output)
Middle positionHD/
DATA MIX: OFF
(HD-SDI output)
Right positionSD
(SD-SDI output)
a: Menu is displayed on image
×: Menu is not displayed on image
28
Location and Function of Parts
SDI connectors
1, 2
a
a ×
a
SDI connectors
1, 2
a
a ×
1)
a/×
1)
When the DATA MIX switch on the front panel of the
BRU-SF10 HD Optical Multiplex Unit is set to ON,
the menu display is overlapped on all images output
from the card. When the DATA MIX switch is set to
OFF, the menu is not displayed on all images output
from the card.
BRBK-SA1 Analog SD Output Card
(not supplied)
1 2
BRBK-SA1
VIDEO S-VIDEO
A VIDEO connector (BNC type)
Supplies analog composite signals. The aspect ratio
can be configured in the SD menu of the camera.
B S VIDEO connector (4-pin mini-DIN)
Outputs S-Video signals. You can configure the
aspect ratio with the SD menu of the camera.
C RGB/SYNC connector (D-sub 9-pin)
Supplies various analog signals such as composite
video, S video, component video and RGB signals.
The output signal can be selected in the SD menu of
the camera.
Notes
• When a BRBK-SA1 Analog SD Output Card is
installed in the BRC-Z330 HD Color Video Camera
and menu display for the camera is turned ON, the
menu display is overlapped with the image.
• When a BRBK-SA1 Analog SD Output Card is
installed in a BRU-SF10 HD Optical Multiplex Unit
on which the front panel DATA MIX switch is set to
ON and menu display for the camera is turned ON, the
menu display is overlapped with the image. When the
DATA MIX switch is set to OFF, the menu will not be
displayed on the image, even if menu display for the
camera is turned ON.
3
RGB/SYNC