Remote Keyless Entry (Rke); System - Buick Enclave 2016 Manual

Hide thumbs Also See for Enclave 2016:
Table of Contents

Advertisement

Warning
If the key is unintentionally
rotated while the vehicle is
running, the ignition could be
moved out of the RUN position.
This could be caused by heavy
items hanging from the key ring,
or by large or long items attached
to the key ring that could be
contacted by the driver or
steering wheel. If the ignition
moves out of the RUN position,
the engine will shut off, braking
and steering power assist may be
(Continued)
Warning (Continued)
impacted, and airbags may not
deploy. To reduce the risk of
unintentional rotation of the
ignition key, do not change the
way the ignition key and Remote
Keyless Entry (RKE) transmitter,
if equipped, are connected to the
provided key rings.
The ignition key, key rings, and RKE
transmitter, if equipped, are
designed to work together. As a
system, it reduces the risk of
unintentionally moving the key out
of the RUN position. If replacements
or additions are required, see your
dealer. Limit added items to a few
essential keys or small, light items
no larger than an RKE transmitter.
The key is used for the ignition and
all door locks.
The key has a bar-coded key tag
that the dealer or qualified locksmith
can use to make new keys. Store
this information in a safe place, not
I n f o r ma t i o n P r o v i d e d b y :
in the vehicle.
Keys, Doors, and Windows
If it becomes difficult to turn the key,
inspect the key blade for debris.
See your dealer if a replacement
key or additional key is needed.
If locked out of the vehicle, call
Roadside Assistance. See Roadside
Assistance Program 0 330.
If equipped, with an active OnStar
subscription, an OnStar Advisor
may remotely unlock the vehicle.
See OnStar, if equipped.
Remote Keyless Entry
(RKE) System
See Radio Frequency Statement
0 336.
If there is a decrease in the RKE
operating range:
Check the distance. The
transmitter may be too far from
the vehicle.
Check the location. Other
vehicles or objects may be
blocking the signal.
Check the transmitter's battery.
See Battery Replacement later
in this section.
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents