Buick Enclave 2016 Manual page 161

160 Infotainment System
Z
Press to eject a disc from the
CD player. If the disc is not removed
within a short period of time, it is
automatically pulled back into the
player.
Playing an Audio CD
Make sure a disc is inserted in the
player.
1. Press the Disc screen button
on the Home Page or from the
SRCE/Source banner.
2. Press the Menu screen button
on the CD Audio screen to
display a list of Tracks/Songs.
3. Press the desired track/song.
On the Disc main page a track
number displays at the beginning of
each track. Song, Artist, Elapsed
Time, and Album information
displays when available.
Use the following controls to play
the disc:
SEEK:
Press to seek to the beginning of
the current or previous track.
If the track has been playing for
less than eight seconds, it seeks
to the previous track. If longer
than eight seconds, the current
track starts from the beginning.
Press and hold to fast reverse
through a track. Release the
button to return to playing
speed. Elapsed time displays.
SEEK :
Press to seek to the next track.
Press and hold to fast forward
through a track. Release the
button to return to playing
speed. Elapsed time displays.
PUSH/SEL (Select) : Turn to the
right or left to select the next or
previous track.
I n f o r ma t i o n P r o v i d e d b y :
Error Messages
If Disc Error displays and/or the disc
comes out, it could be for one of the
following reasons:
The disc has an invalid or
unknown format.
The disc is very hot. Try the disc
again when the temperature
returns to normal.
The road is very rough. Try the
disc again when the road is
smoother.
The disc is dirty, scratched, wet,
or upside down.
The air is very humid. Try the
disc again later.
There was a problem while
burning the disc.
The label is caught in the player.
If the CD is not playing correctly, for
any other reason, try a known
good CD.
If any error continues, contact your
dealer.