Indoor Unit; Removal Of Air Filter - Daikin FTXS20G2V1B Service Manual

Indoor Unit

1. Indoor Unit

1.1

Removal of Air Filter

Procedure
Step
1. Appearance features
2. Remove the air filter.
1 Hold the both sides of
the front panel, and
open the panel to the
position where it stops.
2 Slightly push up the
center knob of the air
filter and release the
hooks.
3 Pull out the air filter
downward and remove
it.
155
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Signal receiver
Room temperature thermistor
ON / OFF button
Front panel
Dangerous: High voltage
A high voltage is applied to
all the electric circuits of this
product including
thermistors.
„ When the signal receiver
(R7900)
Operation lamp
„ When the ON/OFF button is
TIMER lamp
INTELLIGENT
EYE lamp
INTELLIGENT
EYE sensor
(R7901)
(R7902)
„ The air filter is not marked
„ The air filter can be set
„ Insert the air filter with the
„ Be sure to insert the hooks
Air filter
(R7903)
SiENBE04-808_A
Points
Warning
catches a signal from the
remote control, the receiving
tone sounds and the
operation lamp blinks
immediately to confirm the
signal reception.
kept pressed for 5 seconds,
the forced cooling operation
is performed for about 15
minutes.
for difference between the
right and left sides.
easily by inserting it along
the guides.
"FRONT"-mark faced up.
(at 2 lower positions) when
mounting the air filter.
Removal Procedure