Table of Contents
Advertisement
Message
MEMORY FULL PLEASE
WAIT
MEMORY USED nn%
NO ANSWER
NO RX PAPER
NO TEL #
NOT AVAILABLE
PLEASE WAIT
REC'D IN MEMORY
II-18
Error Code
Cause
The FAX-L250 is sending a fax
–
and its memory is full.
Shows how much of the
–
FAX-L250's memory is in use.
The receiving fax machine does
#005
not answer.
The other party's fax machine
#012
is out of paper and its memory
is full.
The one-touch or coded speed
#022
dialling number has not been
registered.
In manual sending via the
–
handset, you tried to use a
one-touchspeed dialling button
or a coded speed dialling code
that has a group registered in it.
The FAX-L250 is warming up.
–
The paper or toner ran out, or
–
a paper jam occurred, so the
FAX-L250 received the
document in memory.
Action
Wait until the fax is sent. The
FAX-L250 continues to send the
fax as memory becomes available.
If you need more memory, print
or send any documents stored in
memory.
Make sure you dialled the correct
number. Try again later.
Contact the other party and have
them add paper to their fax
machine.
Register the number.
In manual sending via the handset,
you cannot send a document to
multiple destinations. Send the
document to one destination at a
time.
Wait until the time and receiving
mode appear in the LCD display,
then begin.
Add paper to the sheet feeder,
change the toner cartridge, or
clear the paper jam, as needed.
When the problem is solved, the
FAX-L250 automatically prints
the document stored in memory.
Advertisement
Table of Contents
