Fujitsu PRIMEQUEST 2000 Series Installation Manual page 187

Appendix G Starting Web BIOS
F.3 Method of identifying SB where SAS RAID Controller is mounted
8. Execute the drvcfg –s XX YY command.
Specify the following for [XX] and [YY].
- XX: UEFI driver number confirmed in step 2
- YY: Controller number confirmed in step 3
Shell> drvcfg –s 126 125
9. The window where you select either EFI WebBIOS menu or EFI CLI menu appears. Select [1 for EFI
WebBIOS].
10. WebBIOS starts up.
The figure below is example of window of WebBIOS.
FIGURE G.7 selection of EFI WebBIOS / EFI CLI
FIGURE G.8 [Adapter Selection] window of WebBIOS
163
CA92344-0536-04