Setting Of Notification In Case That Os Freezes; Completion Of Vmware Installation; Installation Of The Bundled Software; Procedure Of Hyper-V Installation - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 4 Installation of Operating System and bundled software

4.9 Procedure of Hyper-V installation

6. Select installation mode, select operating system to be installed and set the operating system.
Remark
The IP address of LAN cannot be set in setting operating system. Set IP address after installing the operation system.
7. Click [Start installation].
The installation is started.
8. Replace with the installation medium of operating system according to the instructions of SVIM.

4.8.4 Setting of notification in case that OS freezes

Watchdog Timer allows notification in case that OS freezes.
logged and the notification is executed.
2000 series Administration Manual (CA92344-0537).

4.8.5 Completion of VMware installation

Reboot the partition of PRIMEQUEST 2000 series after the completion of setting.

4.8.6 Installation of the bundled software

For the installation of bundled software, see
4.9 Procedure of Hyper-V installation
Install Hyper-V after installing the operating system (Windows Server 2008 R2, Windows Server 2012 or Windows Server
2012 R2).

4.10 Procedure of KVM installation

Install KVM after installing the operating system (Linux RHEL6).
See the following for the installation procedure of KVM.
RHEL6
- Red Hat Enterprise Linux 6 Virtualization Administration Guide
- Red Hat Enterprise Linux 6 Virtualization Getting Started Guide
- Red Hat Enterprise Linux 6 Virtualization Host Configuration and Guest Installation Guide
- Virtualization Security Guide
RHEL7
- Red Hat Enterprise Linux 7 Virtualization Deployment and Administration Guide
- Red Hat Enterprise Linux 7 Virtualization Getting Started Guide
- Virtualization Security Guide
Note
[PRIMEQUEST2400E2/2800E2/2400E/2800E only]
For RHEL6 KVM, Raid Controller Card/HDD/SSD on Non Home SB can't assign to KVM guest using PCI passthrough
function.
When the set time passes MMB System Event Log is
For details, see "8.4 Automatic Partition Restart Conditions" of PRIMEQUEST
"D.2 Installing VMware Bundled
81
Software".
CA92344-0536-04