Janome S-3023 Instruction Manual page 52

Janome S-3023 Instruction Manual
Conditio n
Seam Puckering .
Stitches form loop s
below the work .
The cloth is no t
feeding smoothly .
The machine does no t
wo rk .
The buttonhol e
stitches are no t
balanced .
www.aaasewing.com
50
1. The needle thread tension is too tight .
2. The needle thread is not threaded correctly .
3. The needle is too heavy for the cloth being sewn .
4. The stitches are too coarse for the fabric being sewn .
5. The presser foot pressure is not correctly adjusted .
* When sewing extremely light weight materials, place a sheet of paper underneath the fabric .
1. The needle thread tension is too loose .
2. The needle is either too heavy or too fine for the thread .
1. The feed dog is packed with lint .
2. The presser foot pressure is too weak .
3. The stitches are too fine .
4. The feed dog is not raised after " Drop fee d " has been used .
1. The machine is not plugged in .
2. A thread is caught in the hook race .
3. Clutch knob is pulled away for the bobbin winding .
4. Bobbin winder spindle is in the winding position .
1. The stitch length is not suitable for the fabric being sewn .
2. The work is being pulled or held back .
3. Interfacing is not used with stretch fine fabrics .
Ca u s e
Janome sewing machine
Referenc e
See Page 2 1
See Page 1 9
See Page 1 5
Make the stitche s
denser .
See Page 1 0
See Page 2 1
See Page 1 5
See Page 4 8
See Page 1 0
Make the stitche s
c oa rs e r .
See Page 1 0
See Page 8
See Page 4 8
See Page 1 7
See Page 1 7
See Page 29,32 and 3 4
Do not force the fabri c
for guiding .
See Page 2 9
S-3023 Owners Manual/ User Guide