Changing Needle - Janome S-3023 Instruction Manual

Janome S-3023 Instruction Manual

Changing Needle

Raise the needle by turning the
handwheel toward you and lower
the presser foot.
Turn off the power switch.
www.aaasewing.com
14
Loosen the needle clamp screw by turning it counter-clockwise.
Remove the needle from the clamp.
Insert the new needle into the needle clamp with the flat side away
from you.
When inserting the needle into the clamp, push it up as far as it will
go and tighten the clamp screw firmly with the screwdriver.
* Check your needles frequently for barbed or blunted points.
Snags and runs in knits, fine silks and silk-like fabrics are
permanet and are almost always caused by a damaged needle.
Janome sewing machine
S-3023 Owners Manual/ User Guide