Table of Contents
Advertisement
Janome S-3023 Instruction Manual
!0 !1
Cut the both needle and bobbin threads
!0
leaving about 10 cm (4˝) thread ends.
Draw the needle thread to wrong side of
fabric by pulling the bobbin thread.
Then, knot the threads.
Insert a pin inside the bartack.
!1
Then cut the opening with a seam
ripper.
Take care not to cut the stitches.
www.aaasewing.com
!2
To repeat buttonhole sewing.
!2
After a buttonhole is sewn, move the indicator to pattern
"1" (
) by turning the pattern selector dial in the
direction of arrow 1, then return the indicator back to
"BH" by turning the dial in the direction of arrow 2 to
reset for sewing the next buttonhole.
Janome sewing machine
!3
When buttonhole sewing is
!3
finished, push the buttonhole
lever upward as far as it will go.
S-3023 Owners Manual/ User Guide
31
Advertisement
Table of Contents
