Rear Panel - Sony DXC-390P Instructions For Use Manual

4 BARS (color bars output) button
Outputs the color bar signal. Press again
to revert to video signal output.
For monitor adjustment, contact your
authorized Sony dealer.
5 ENTER button
Selects a setting menu in the MAIN
menu. Also use this button for an AE
window setting, etc.
v button
6
Moves the menu cursor downward. Also
use this button for an AE window
setting, etc.
7 B /FILE SELECT button
While the menu is displayed:
Decreases the setting value or changes
the setting. Also use this button for an
AE window setting, etc.
While the normal screen is displayed:
Switches the user preset file between A
and B.
8 FLANGE BACK (flange focal
length) adjustment ring
Adjusts the flange focal length of a lens
which is not equipped with this function.
For details on flange focal length
adjustment, see "Adjusting the Flange
Focal Length" on page 31.
12
Location and Functions of Parts and Controls

Rear Panel

DC IN/VBS
TRIG IN
MENU LOCK
OFF ON
RGB/SYNC
1 MENU LOCK ON/OFF switch
When this switch is set to ON, the menu
is not displayed on the screen even if you
press the MENU button.
DC IN/VBS
2
video signal output) connector
(12-pin)
Connects to the CMA-D2CE
*
D2MDCE/D3CE
Inputs the DC power and outputs the
video signal.
* CMA-D2CE/D3CE are intended for general
purpose use. They are not intended for medical
use.
3 TRIG IN connector (BNC type)
Connects to a commercially available
slave unit by converting to BNC type in
strobe mode.
4 LENS connector (6-pin)
Connects to a lens control cable when
attaching the zoom lens.
5 VIDEO OUT
type)
Outputs a composite video signal.
VIDEO OUT
LENS
REMOTE
(DC input/
*
/
camera adaptor.
connector (BNC