General Menu - Sony DXC-390P Instructions For Use Manual

GENERAL menu

Sets the general items.
<GENERAL>
>CCD MODE
SHADING COMP.
TRIGGER
NEGA
FLICKER CANCELLER
Select
MENU
Setting items in the GENERAL menu
Setting item Contents of
setting
CCD MODE Selects the CCD
read-out mode.
SHADING Eliminates color at
COMP. the top and bottom
of the screen.
TRIGGER Sets the polarity
when connecting a
slave unit to
synchronize with a
stroboscope.
NEGA Reverses the
output image to
negative.
FLICKER Reduces flicker
CANCELLER when SHUTTER
is set to CCD IRIS
or OFF.
CCD MODE
Selects the CCD read-out mode.
FIELD
Accumulates charges in field units. Use to
shoot a moving object.
[A]
FIELD
OFF
OFF
OFF
OFF
Back
Ref.
page
25
25
25
26
26
FRAME
Accumulates charges in frame units.
Provides the image with the highest possible
vertical resolution. Use to shoot a still
object.
SHADING COMP. (Shading
compensation)
Eliminates green or magenta color which
may appear at the top or bottom of the
screen, when the camera is used with an
optical instrument.
OFF
Color elimination does not function.
ON
If green or magenta color appears at the top
or bottom of the screen when the camera is
attached to a microscope, etc., select this
setting.
When SHADING COMP. is set to ON,
LEVEL is displayed. Adjust while watching
the screen so that the color is eliminated.
Adjustable range is from –127 to +127.
+: Green at the top and magenta at the
bottom will be eliminated.
–: Magenta at the top and green at the
bottom will be eliminated.
TRIGGER
Set when you use a slave unit connected to
the TRIG IN connector and synchronize the
camera with a stroboscope.
OFF
Select when you do not connect a slave unit.
ON
Select when you connect a slave unit.
Select POLARITY, and set it to the same
polarity as the input pulse signal.
: Falling edge
: Rising edge
GENERAL menu
25