Table of Contents
Advertisement
SUPERSERVER 2027TR-D70RF+ USER'S MANUAL
Front Control Panel
SC217HD-R1K28MB chassis includes two front panels on the handles of the
chassis which control each of the systems. Each control panel on the SuperServer
2027TR-D70RF+ provides you with system monitoring and control for one server
node. LEDs indicate system power, HDD activity, network activity, system overheat
and power supply failure. A main power button and a system reset button are also
included.
I/O Ports
The SC217HD is an propriertary form factor chassis designed to be used in a 2U
rackmount confi guration. The SC217HD chassis provides a low-profi le add-on card
slot, a COM port, a VGA port, two USB 2.0 ports, one IPMI Ethernet port and two
Ethernet ports per node.
Cooling System
The SC217HD chassis accepts four system fans. System fans for the SC217HD
chassis are powered from the motherboards or the HDD backplane. On SC217HD
model chassis, the two fans on each side are controlled by two motherboards, so
that when one of the motherboard nodes is removed, the second motherboard will
continue to control both fans.
Air Shrouds
The SC217HD chassis includes two plastic air shrouds that direct the airfl ow where
cooling is needed on each serverboard. Always use the air shroud included with
your chassis on each serverboard.
Mounting Rails
The SC217HD includes a set of quick-release rails, and can be placed in a rack
for secure storage and use. To setup your rack, follow the step-by-step instructions
included in this manual.
1-4
Advanced Power Management (for -F Models Only)
Intel® Intelligent Power Node Manager (NM)
®
The Intel
Intelligent Power Node Manager (IPNM) provides your system with
real-time thermal control and power management for maximum energy effi ciency.
Although IPNM Specifi cation Version 1.5 is supported by the BMC (Baseboard
1-4
Advertisement
Table of Contents
