•
NIC: Indicates network activity on either LAN1 or LAN2 when fl ashing.
3-4
Drive Carrier LEDs
The SC217 chassis uses SAS/SATA drives.
SAS/SATA Drives
Each SAS/SATA drive carrier has two LEDs.
•
Blue: Each Serial ATA drive carrier has a blue LED. When illuminated, this blue
LED (on the front of the SATA drive carrier) indicates drive activity. A connection
to the SATA backplane enables this LED to blink on and off when that particular
drive is being accessed.
•
Red: The red LED to indicate an SAS/SATA drive failure. If one of the SAS/
SATA drives fail, you should be notifi ed by your system management software.
SCSI Drives
This chassis does not support SCSI drives at this time.
Chapter 3: System Interface
3-3