Appendix B System Specifi Cations - Supero SUPERSERVER 2027TR-D70RF+ User Manual

Appendix B: System Specifi cations
Appendix B
System Specifi cations
Note: Unless noted specifi cations apply to a complete system (all serverboards).
Processors
Two E5-2600 series processors per node in Socket R LGA 2011 type sockets
Note: please refer to our website for details on supported processors.
Chipset
One C602 chipset per node
BIOS
128 Mb AMI BIOS® Flash EEPROM per node
Memory Capacity
For each node up to sixteen (16) DIMM slots supporting up to 512 GB
of DDR3-1600/1333/1066/800 MHz registered ECC SDRAM in
512 MB, 1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB sizes of 1.5V or 1.35V
voltages.
Note: refer to Section 5-6 for details on installation.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory support
information.
SAS Drive Bays
The SuperServer 2027TR-D70RF+ contains twenty-four (24) hot-swap drive bays
to house twenty-four (24) standard 2.5" SAS drives
PCI Expansion
Each SuperServer 2027TR-D70RF+ has for each node one (1) available PCI-E
3.0 x8 Slot for SMC-Proprietary Micro LP Card (CPU1 Slot2) that can be used.
Serverboard
X9DRT-HF+ serverboard (proprietary form factor)
Dimensions: (LxW) 6.8 x 16.64 in. (172.72 x 422.66 mm)
B-1