Group Scan And Priority Scan - Icom ic-450 Instruction Manual

6
SCAN

■ Group scan and priority scan

Group and priority scans repeatedly look for a signal on the
priority channel while scanning the specified channels. This
is useful when waiting for a call on the priority channel or
several specified channels.
The Group and Priority scans are performed differently
when transmitting. The Group scan can transmit on a priority
channel or on a busy channel, and the Priority scan can
transmit only on a priority channel.
Select "Group Scan" or "Priority Scan" in the "Scan Mode"
q
menu. (p. 22)
• " " appears when a Group scan is selected, and "
appears when a Priority scan is selected.
Appears
Group scan is selected.
When the priority scan type is selected in step
w
Priority channel, if desired. (p. 13)
• If the priority channel is not set, the scan start channel is
monitored during a Priority scan.
24
"
Appears
Priority scan is selected.
q, set the
Push to start the scan.
e
Group scan
Blinks
Scan start channel
r When receiving a signal, the scan pauses and resume,
according to the selected scan resume mode.
(pp. 17, 23)
t Push to cancel the scan.
Priority scan
Blinks
Scan start channel