Set Mode; Set Mode List; Set Mode Operation - Icom ic-450 Instruction Manual

4

SET MODE

■ Set mode
In the Set mode, you can change various common settings
for the transceiver, or individual settings for the operating
channel. Essentially, you can customise the transceiver to
suit your preference and operating style.
The functions you can use may differ, depending on the
presetting set with the cs-450
NOTE: You can access the Set mode by pushing
and then selecting the "Settings" item.
D Set mode operation
Push to enter the menu mode.
q
Push [ ] or [] to select "Settings," and then push [].
w
Push [ ] or [] to select the desired item, and then push
e
[].
Push [ ] or [] to select the desired value of the item,
r
and then push [] to set.
t Push to exit the menu mode.
16
.
cloning software
,
D Set mode list
Item
• CTCSS/DTCS
• Mic Gain
• Roger Beep
• Beep
• Beep Level
• Scan Resume
• Scan Restart
• Lockout
• Power Timer
• Internal SP
• Voice Guidance
• Signal Indication
• PTT Hold
• Contrast
• Backlight
• Brightness
• Voice Recorder
• Clear Rec Data
• Noise Cancel
• Reset
• Mic Hanger
Default Ref.
01:67.0 (CTCSS)
3
OFF
ON
p. 17
High
5sec No Signal
OFF
OFF
OFF
ON
ON
p. 18
OFF
OFF
5
ON
4
ON
No p. 19
OFF
No
OFF