Hm-212 Description - Icom ic-450 Instruction Manual

■ HM-212 Description

o
i
u
y
t
q POWER KEY (p. 10)
Hold down for 2 seconds to turn the power ON or OFF.
w CLEAR KEY (pp. 14, 16)
Push to cancel a setting or to return to the previous
menu.
e VOLUME CONTROL KEYS
Push to adjust the audio level (from 0 to 32).
➥
• " " appears when the audio level is set to 0 (silent mode).
Information: You can disable the keys, or each key function can be reassigned to the keys using the optional CS-450
q
Microphone
w
e
r
Speaker
/
r D-PAD KEYS []/[]/[]/[]/[]
Push [ ]/[] to select an operating channel, menu
➥
setting and so on. (pp. 10, 16)
Push [ ]/[] to select a digit to edit. (pp. 29, 33)
➥
Push [ ] to select an item or setting in the menu.
➥
(pp. 29, 33)
Push [ ] to select the Priority CH in the standby mode.
➥
Hold down [ ] for 2 seconds to set the displayed
➥
channel as a Priority channel. (p. 13)
• Hold down again to unset the Priority channel.
t REC DATA/REC PAUSE KEY (p. 15)
Push to display the recorded audio menu.
➥
Hold down for 2 seconds to start and stop recording.
➥
y SCAN/MONI KEY (pp. 14, 23)
Push to start or stop the scan. (pp. 23, 24, 25)
➥
Hold down for 2 seconds to turn the Monitor function
➥
ON or OFF . (p. 14)
u MENU/KEY LOCK KEY
Push to enter the menu mode. (p. 16)
➥
Hold down for 2 seconds to turn the Key Lock function
➥
ON or OFF.
i PTT SWITCH [PTT] (p. 12)
Hold down to transmit, release to receive.
o TX/RX INDICATOR (p. 12)
The indicator lights or blinks when you transmit and receive.
UNIT DESCRIPTION
. (p. 34)
cloning software
2
2
7