Group And Priority Scan - Icom IC-440N Instruction Manual

■

Group and Priority scan

Group and Priority scans repeatedly look for signal on the Pri-
ority channel while scanning specifi ed channels. This is use-
ful when waiting for a call on the Priority channel or several
specifi ed channels.
Group and Priority scans behave differently when transmit-
ting. Group scan can transmit on a Priority channel or busy
channel, and Priority scan can transmit on only a Priority
channel.
q
Push O G P (Scan Mode) several times to select the Group
RS
or Priority scan. (p. 29)
• " " appears when the Group scan is selected, and "
appears when the Priority scan is selected.
Appears
Group scan is selected.
w
When the priority scan type is selected in step
Priority channel if desired. (p. 17)
• When the Priority channel is not set, scan start channel is moni-
tored during the Priority scan.
"
Appears
Priority scan is selected.
q, set the
Appears
e Push
SCAN
to start the scan.
(Scan)
TAG
Group scan starts.
Priority scan starts.
r When receiving a signal, the scan pauses and resumes,
according to the selected Scan resume mode. (p. 30)
t Push
SCAN
to cancel the scan.
(Scan)
TAG
6
SCAN
Blinks
Scan start channel
Blinks
Priority channel
6
31