3100 Limited Edition Special Instructions
REMOVING FROM PALLET
1. Remove Tile frames from both sides by lifting
up and away. (Fig. 14.3)
2. Remove both side panels using a phillips
screwdriver to remove 4 screws on back (Fig.
14.1)
3. Using a 11mm socket or wrench, remove 4
wood lag bolts located in corners of pedestal
base. (Fig. 14.2)
4. Lift stove off of pallet and reassemble sides.
1
2
Fig.14.1
Fig.14.2
March 4, 2015
3100 Series ACC Wood Burner
DECORATIVE TILE INSTALLATION
1. Remove Tile frames from sides by lifting up
and pulling away from stove.(Fig. 14.3)
2. Stack tiles in tile frame as shown (Fig. 14.4)
3. Reattach Tile Frames.
Fig.14.3
Fig.14.4
7033-308D
Page 9